Excl. VAT · +15% added at checkout · Bulk pricing from 10+ units
Min order 1 · sold individually · pack of 1
100% genuine
5-day delivery
7-day returns · 14-day exchange
Secure payment
Trusted Partnerships
Schneider Electric soft starter. soft starter for asynchronous motor, Altistart 01, ATS01, 6A, 380 to 415V, 1.5 to 3kW.
soft starter for asynchronous motor, Altistart 01, ATS01, 6A, 380 to 415V, 1.5 to 3kW. Genuine Schneider Electric product supplied by United Force.
| Range of product | Altistart 01 |
|---|---|
| Product destination | Asynchronous motors |
| Product or component type | Soft starter |
| Product specific application | Simple machine |
| Device short name | ATS01 |
| Network number of phases | 3 phases |
| [Us] rated supply voltage | 380...415 V - 10...10 % |
| Motor power kW | 3 kW, 3 phases at 380...415 V · 1.5 kW, 3 phases at 380...415 V · 2.2 kW, 3 phases at 380...415 V |
| IcL starter rating | 6 A |
| Utilisation category | AC-53B conforming to EN/IEC 60947-4-2 |
| Current consumption | 30 A at nominal load |
| Type of start | Start with voltage ramp |
| Power dissipation in W | 4 W at full load and at end of starting · 64 W in transient state |
| Assembly style | With heat sink |
| Function available | Integrated bypass |
| Supply voltage limits | 342…456 V |
| Supply frequency | 50...60 Hz - 5...5 % |
| Network frequency | 47.5...63 Hz |
| Output voltage | <= power supply voltage |
| [Uc] Control circuit voltage | Built into the starter |
| Starting time | 1 s / 100 · 5 s / 20 · 10 s / 10 · Adjustable from 1 to 10 s |
| Deceleration time symb | Adjustable from 1 to 10 s |
| Starting torque | 30...80 % of starting torque of motor connected directly on the line supply |
| Discrete input type | Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
| Discrete input voltage | 24...40 V |
| Discrete input logic | Positive LI1, LI2, BOOST at State 0: 13 V, >= 0.5 mA |
| Discrete output current | 2 A DC-13 · 3 A AC-15 |
| Discrete output type | Open collector logic LO1 end of starting signal · Relay outputs R1A, R1C NO |
| Discrete output voltage | 24 V (voltage limits: 6...30 V) open collector logic |
| Minimum switching current | 10 mA at 6 V DC for relay outputs |
| Maximum switching current | Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load · Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load |
| Display type | 1 LED (green) for starter powered up · 1 LED (yellow) for nominal voltage reached |
| Tightening torque | 1.9…2.5 N.m · 0.5 N.m |
| Electrical connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² 8 AWG power circuit · Screw connector - rigid without cable end 1 0.5...2.5 mm² 14 AWG control circuit · 4 mm screw clamp terminal - rigid 2 1...6 mm² 10 AWG power circuit · Screw connector - rigid 2 0.5...1 mm² 17 AWG control circuit · Screw connector - flexible with cable end 1 0.5...1.5 mm² 16 AWG control circuit · 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² 8 AWG power circuit · Screw connector - flexible without cable end 1 0.5...2.5 mm² 14 AWG control circuit · 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² 10 AWG power circuit · 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² 10 AWG power circuit · Screw connector - flexible without cable end 2 0.5...1.5 mm² 16 AWG control circuit |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 124 mm |
| Width | 45 mm |
| Depth | 131 mm |
| Product weight | 0.42 kg |
| Compatibility code | ATS01N2 |
| Power range | 1.1…2 kW at 380…440 V 3 phases · 2.2…3 kW at 380…440 V 3 phases |
| Motor starter type | Soft starter |
| Electromagnetic compatibility | Conducted and radiated emissions level B conforming to CISPR 11 · Conducted and radiated emissions level B conforming to IEC 60947-4-2 · Damped oscillating waves level 3 conforming to IEC 61000-4-12 · Electrostatic discharge level 3 conforming to IEC 61000-4-2 · EMC immunity level 3 conforming to EN 50082-1 · EMC immunity level B conforming to EN 50082-2 · Harmonics level 3 conforming to IEC 1000-3-2 · Harmonics level 3 conforming to IEC 1000-3-4 · Immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6 · Immunity to electrical transients level 4 conforming to IEC 61000-4-4 · Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3 · Micro-cuts and voltage fluctuation conforming to IEC 61000-4-11 · Voltage/current impulse level 3 conforming to IEC 61000-4-5 |
| Standards | EN/IEC 60947-4-2 |